The following five points should be paid attention to when operating the non-dismantling floor deck equipment

Let's talk about the following five points that should be paid attention to when operating the non-dismantling floor deck equipment

The following five points should be paid attention to when operating the non-dismantling floor deck equipment

After purchasing, it is necessary to operate in accordance with the operation specifications of the non-dismantling floor deck, otherwise it will not only damage the equipment, but also affect our products.

After we bought the non-dismantling mold floor deck equipment, when it is put into use, we need to pay attention to the use in strict accordance with the operating procedures, otherwise we not only need to check the equipment regularly before operation, but also need to check the equipment in advance to eradicate the problems in the operation of the machine.

One, if you don't need to use this machine, unplug it.

2. During the operation of the machine, you must not throw anything into it or into the machine.

3. Cut off the power supply before checking the non-dismantling floor deck equipment to ensure environmental safety.

Fourth, the information sharing cooperation should meet the requirements, and the mixing time should not be less than 120S.

5. Cut off the power supply after the operation and do a good job of sorting out the next operation.

If you have not done the above points, then from now on you have to pay more attention, the correct operation can ensure the smooth development of production operations, buy the floor plate can not only look at the price but not look at the quality.

With the development of society in the 21st century, a large number of high-rise buildings of different heights have been built in the city, therefore, the use of steel truss floor deck is more and more frequent, and the production level of some manufacturers is not up to standard, resulting in the production of floor deck, and the floor deck produced can not meet the construction needs.

1. Choose a large steel bar truss without dismantling the formwork floor bearing plate manufacturers, large manufacturers, not only more product types to choose, but also better after-sales service.

2. The material is more important for the non-dismantling of the floor deck, so it is necessary to choose the material of the floor deck, and clarify the thickness and error of the floor deck, and try to write the thickness and error and other parameters in the contract.

3. If conditions permit, you can find several manufacturers to compare on the spot, and consider them comprehensively through the comparison of workmanship, material and price.

4. Because the production time of the same plate is different and the color is different, it is necessary to pay attention to the selection of products of the same color.

5. It is worth the money, so when buying, you should not only pay attention to the price, but also consider all aspects of factors and choose the right product for you.

Through the above introduction, we have a further understanding of the non-demolition mold floor deck, when we buy, we can not only be greedy for cheap prices, but also consider many aspects, the ability to find a few more to compare and then buy.