How to use the non-dismantling floor deck to achieve the seismic effect

Let's talk about how to use the non-demolition mold floor deck to achieve the seismic effect

How to use the non-dismantling mold floor deck to achieve the seismic effect

The loss caused by the earthquake is still relatively large, it can cause serious disasters such as house collapse, landslides, fires, floods, plagues, etc., and its destructiveness is still relatively large.

1. In fact, the earthquake is far more terrible than you imagined, and you can't avoid the disaster that befalls you, but we can do some preventive measures in life, such as when using the closed non-demolition mold floor deck, it is very effective to choose a strong seismic performance.

2. Nowadays, high-tech has been gradually applied to development, and building materials enclosed floor decks have a variety of functions in performance, and earthquake resistance is one of them.

3. In addition, it also has the functions of environmental protection, waterproof, fire prevention, etc., which is deeply loved by consumers, when choosing this material, choose good seismic performance, which can effectively prevent earthquakes, in case of an earthquake, you can see how effective it is.

4. Before the construction and installation of the steel structure residential formwork floor deck, draw the corresponding floor plan, and carry out the construction according to the drawings, the profiled steel plate is laid along one end of the floor decking plate, and the position is adjusted and fixed while laying, if there is a hole, the profiled steel plate is installed first, and then the hole size is cut according to the actual hole position, and the stub is the floor.

5. The beam is connected with the connector of the reinforced concrete non-dismantling formwork floor bearing plate, and the arc stud welding machine (model: YD-200LS) and electric welding* (model: YS-223G) are used for construction.

6. The welding method of using deoxidized arc heat-resistant ceramic seat and steel structure floor deck deck: turn on the welding power supply of the welding machine, put the cylindrical stud on the welding power supply to prevent the arc seat ring, start the welding power supply, the current will melt, the seat will produce arc light, after a short time, the cylindrical stud will be pressed on the end of the base metal to melt at a certain speed, and cut off the power supply, and the cylindrical stud will be welded and fixed on the base metal.

7. Steel structure closed formwork without dismantling the floor bearing plate bearing plate bolt welding inspection: the quality of the cylindrical bolt is mainly hammered, supplemented by appearance and surface inspection, take 1/500 of the daily output for bending inspection, if there is no crack at the weld, it is considered qualified, if there is a crack at the weld, the bolt will be rejected, and a cylindrical bolt needs to be welded nearby as a supplement.

8. During the construction of the floor deck without demolition, the floor deck is generally laid on the steel beam first, and then welded on the steel beam with welding nails (shear plates), and then the reinforcement mesh is tied and the concrete is poured, and this floor cover method is widely used in the domestic high-rise steel structure.

The above is the content of "how to use the non-demolition mold floor deck to achieve the seismic effect" explained by the editor, have you understood? I hope the content explained above can help you, thank you for watching, and we'll see you next time.